Eiffage Route contribue à l'amélioration du réseau français, des voies communales aux tracés autoroutiers, qu'il s'agisse de conception, de construction ou d'entretien. Experte en aménagement urbain, Eiffage Route participe également à la réalisation de projets portuaires, aéroportuaires, industriels et commerciaux.

• Installation
• Participate in building site rollout and overall security
• Creating the routes required for masonry works
• Building site completion
• Forward the equipment needed for the building site: choose the right tools and equipment, check that they work properly.
• Anticipate equipment requirements and request the corresponding supplies.
• Use the building site's small equipment and machines.

• Produce reporting for various managers regarding the completed construction works and difficulties experienced
• Ensure the quality and security of the works within the set time frame
• Manage environmental constraints and ensure the full adoption of the corresponding measures

• AER MASON
  • Concrete placing installation and preparation
  • Work with installer to review distribution and three-dimensional positioning of the guide wire and plates in relation to the construction to be completed
  • Implement reinforcements, wires and water passages by respecting the standards (covering, welding, tying, spacing, etc.)
  • Carry out formwork
  • Masonry
  • Carry out the finishing masonry on the cast construction work
  • Carry out manual masonry on extruded constructions (safety barrier lowering, boat passage)
  • Perform standard concrete placing vibration
  • Work with exposed aggregate concrete
  • Smooth and finish concrete slabs (troweling + screeding + flushing)
• EXTRUDED CONCRETE INSTALLER
  • Installation
  • Identify the work area with the Team Leader
  • Position the installation plates along the entire length of the pouring area
  • Position an installation pin at the beginning and end of the pouring area
  • To achieve this, the installation is sunk into the ground
  • Unwind the installation string
  • Work in pairs/twos to review set-up and three-dimensional positioning of the string and the plates in relation to the construction to be completed
  • As work progresses, identify other concrete placing areas
  • Gradually stow the plates in the truck before placing them in a plate box
  • Masonry
  • Complete masonry work during concrete placing
  • Assist Machine Operator in arranging mold sets
• EXTERNAL WORKS MASON
  • Pipe laying
  • Adjust the excavation floor, put the networks in place (pvc, cast iron, sandstone).
  • Lay the various service pipes: connections to inspection chambers, breech-pieces, pressure taps, miscellaneous installations.
  • Set up dry networks (telecom, electrical)
  • Masonry
  • Make mortar and concrete mixes and choose aggregates and doses; help to lay roadsides/curbstones.
  • Lay or assist with the laying of roadsides/curbstones.
  • Align and elevate concrete blocks.
  • Assemble prefabricated parts (for observation wells, retaining walls).
  • Dig trickle channels and carry out finishing work (patching, coating)
  • Concrete
  • Carry out standard formwork.
  • Make and implement traditional, simple or complex formwork.
  • Assemble simple reinforcements.
  • Coatings
  • Carry out exposed aggregate concrete surfaces.
  • Lay paving stones and concrete slabs.
  EXIGENCES
  • Expérience requise : Maçonnerie industrielle ou traditionnelle
  • Variées autorisations peuvent être requises en fonction de la spécialisation
  ENVIRONNEMENT DE TRAVAIL
  • Hiérarchie : Chef d'équipe ou Responsable de chantier
  • Équipe de chantier interne
  • Coordonnateur QPSE
  • Opérateurs de machines/voitures
  • Relations externes
  • Co- et sous-traitants
  • Employés de livraison
  • Employés temporaires