Maçon VRD H/F

Eiffage Route contribue à l'amélioration du réseau français, des voies communales aux tracés autoroutiers, qu'il s'agisse de conception, de construction ou d'entretien. Experte en aménagement urbain, Eiffage Route participe également à la réalisation de projets portuaires, aéroportuaires, industriels et commerciaux.

MISSIONS

CORE HOURS:

Installation
Participate in building site rollout and overall security
Creating the routes required for masonry works

Building site completion
Forward the equipment needed for the building site: choose the right tools and equipment, check that they work properly.
Anticipate equipment requirements and request the corresponding supplies.
Use the building site's small equipment and machines.

Quality, Prevention, Security and Environment
Produce reporting for various managers regarding the completed construction works and difficulties experienced
Ensure the quality and security of the works within the set time frame
Manage environmental constraints and ensure the full adoption of the corresponding measures

Building site withdrawal
Maintain clear access to the building site and facilities, maintain the building site's signage.
Clean up the work area and stow away building site equipment
Ensure recovery of unused materials upon building site completion

SPECIFIC ACTIVITIES

AER MASON

Concrete placing installation and preparation
Work with installer to review distribution and three-dimensional positioning of the guide wire and plates in relation to the construction to be completed
Implement reinforcements, wires and water passages by respecting the standards (covering, welding, tying, spacing, etc.)
Carry out formwork
Masonry
Carry out the finishing masonry on the cast construction work
Carry out manual masonry on extruded constructions (safety barrier lowering, boat passage)
Perform standard concrete placing vibration
Work with exposed aggregate concrete
Smooth and finish concrete slabs (troweling + screeding + flushing)

EXTRUDED CONCRETE INSTALLER

Installation
Identify the work area with the Team Leader
Position the installation plates along the entire length of the pouring area
Position an installation pin at the beginning and end of the pouring area To achieve this, the installation is sunk into the ground
Unwind the installation string
Work in pairs/twos to review set-up and three-dimensional positioning of the string and the plates in relation to the construction to be completed
As work progresses, identify other concrete placing areas
Gradually stow the plates in the truck before placing them in a plate box

Masonry
Complete masonry work during concrete placing
Assist Machine Operator in arranging mold sets

EXTERNAL WORKS MASON

Pipe laying
Adjust the excavation floor, put the networks in place (pvc, cast iron, sandstone).
Lay the various service pipes: connections to inspection chambers, breech-pieces, pressure taps, miscellaneous installations.
Set up dry networks (telecom, electrical)

Masonry
Make mortar and concrete mixes and choose aggregates and doses; help to lay roadsides/curbstones.
Lay or assist with the laying of roadsides/curbstones. 
Align and elevate concrete blocks.
Assemble prefabricated parts (for observation wells, retaining walls).
Dig trickle channels and carry out finishing work (patching, coating)

Concrete
Carry out standard formwork.
Make and implement traditional, simple or complex formwork.
Assemble simple reinforcements.

Coatings
Carry out exposed aggregate concrete surfaces.
Lay paving stones and concrete slabs.

JOB REQUIREMENTS

Experience required: Industrial or traditional masonry, Joinery

Various authorizations may be required depending on specialization

JOB ENVIRONMENT
Reporting line:
Team Leader or Site Supervisor
Building Site Team 

Internal relations:
Building Site Team, Quality Prevention Safety and Environmental (QPSE) Coordinator, Machine/Vehicle Operators 

External relations:
Co- and sub-contractors, Delivery employees, Temporary employees

VOTRE PROFIL

Formation / Expérience :

De formation CAP Maçon VRD – Bac Pro Travaux Publics et/ou vous disposez d'une expérience significative d'au moins 3 ans dans le métier.

Compétences :

Compétences techniques :

• CACES petits engins (R482 cat. A)

• Habilitation électrique H0 / B0 et AIPR opérateur

• Lecture de plan / implantation

• Permis E obligatoire / Permis BE souhaité

Vous faites preuve d'initiative, de rigueur et d'esprit d'équipe, ce poste est fait pour vous

Avantages :  

Salaire sur 13,3 mois, selon profil et expérience. 

Paniers, épargne salariale et actionnariat salarié. 

Conformément à nos valeurs, nous favorisons l'égalité des chances : tous nos postes sont ouverts, à compétences égales, aux candidatures de personnes reconnues en qualité de travailleurs handicapés. 

Vous souhaitez vous investir au sein d'un grand groupe capable de vous offrir de réelles opportunités de carrière. Alors rejoignez-nous  

---