Mechanical Engineer
Enregistrez cette offre et organisez votre recherche
Créez un compte gratuit pour enregistrer des offres d'emploi, créer des alertes et revenir à cette liste depuis votre tableau de bord.
En continuant, vous acceptez nos Conditions d’utilisation & Politique de confidentialité.
Rockets have not gotten wider. Satellites need far more power than they used to. The only way through is structures that pack into a fairing and unfold into something massive on orbit.
Gama is building that: ultra-light deployable solar arrays, from 3 kW to over 100 kW, in a factory sized for 100 MW. Almost nothing about this exists off the shelf. Most of it has to be invented, tested and made manufacturable, here, by a small team. That team is growing fast, and most of the growth is mechanical engineers.
We are hiring several mechanical engineers to own real pieces of that hardware. You will join one of three teams, the deployable beam team, the solar array team or the manufacturing team in our factory, and own a subsystem from first calculation to test result. You do not need to have worked on a solar array or in space. You do need to have designed something, got it built, and made it work. Gama operates with extreme ownership: you own the outcome, not just the parts or the process.
Your mission will be to:
- Own the mechanical design of a subsystem of a deployable solar array: a hinge, a latch, a boom segment, a panel structure, a PV integration detail, a piece of ground support or test equipment. Small at first, bigger as you prove yourself.
- Take it from concept through detailed design, analysis, prototype and test. Requirements at Gama are a starting hypothesis; you are expected to challenge them and make them better. Start from physics, not from heritage.
- Get hands-on with hardware. Prototype in the morning, put it in the thermal chamber in the afternoon, learn from what broke, iterate. We test in-house and we treat failure as data.
- Design for a production line, not a one-off. 100 MW a year means every part you draw has to be made thousands of times.
- Do the analysis yourself: hand calculations first, FEA when it earns its place, test to close the loop.
- Work with suppliers and our own workshop to get parts made, and with the test team to get them qualified.
- Learn fast from the senior engineers around you, and own more every quarter.
Profile required
We are not setting a seniority level for this role. Whether you have one development cycle behind you or four, if the bullets below describe you, apply. We have several of these roles to fill this year, which is why this post is broad: your team and scope are decided during the process, based on what you have built.
Must have
- You have taken at least one piece of hardware from blank sheet to something that got built and worked. Any domain: robotics, motorsport, aircraft, drones, medical devices, consumer hardware, industrial machinery, student competition teams, research rigs. What matters is that it did not exist before, you designed it, it got built, and it worked.
- First-principles mechanical engineering. Given an unfamiliar problem, you open the textbook and find the governing equations. You can explain the \"why\" behind every design decision you have made.
- Hands-on experience prototyping and testing your own designs, and a habit of getting to hardware early rather than extending the analysis.
- Fluency with CAD (e.g. CATIA, Siemens NX, Solidworks); comfort with hand calculations and a working knowledge of FEA.
- You have made parts, or had parts made: you know what a machinist, a composites shop or an injection moulder will say about your drawing before you send it.
- Autonomy, and a willingness to be fully responsible for a part of the finished product.
- A proactive attitude, excellent interpersonal skills and unbounded curiosity.
- Professional English. French is a plus, not a requirement.
Nice to have
- Experience with mechanisms that move: hinges, latches, springs, gear trains, actuators.
- Experience with lightweight structures: composites, thin-walled metal, bonded assemblies.
- Exposure to environmental testing (vibration, thermal vacuum, thermal cycling) or to spacecraft and launch vehicle hardware, ideally within a fast-paced New Space environment.
- Experience with design for manufacturing, making a design that is not only producible but easy to make.
This role is probably not for you if your typical work has been executing a design against a standard or requirements list handed to you, or if you are most comfortable working in a rigidly defined engineering process. At Gama, everyone is a systems engineer and we embrace the ownership and the messy reality of hardware development to produce world-changing products.
Company description
Gama is a NewSpace startup based in Ivry-sur-Seine, near Paris. We are developing a next-generation power system for commercial LEO satellites — from solar array power conversion to battery energy storage. We design, build, and test our hardwa